![KANEKID WELDS](/img/default-banner.jpg)
- 110
- 1 351 447
KANEKID WELDS
United States
Приєднався 27 кві 2011
Welding by Rush Kane
Building a Custom 5.5 Phantom Putter into a Face-Balanced LongNeck With Personalized Details
ForeGolfModsOnly.com
Переглядів: 840
Відео
CUSTOM PUTTER • LongNeck Modification - Hand Built to Exact Player’s Spec.
Переглядів 4282 місяці тому
Phantom Putter with a Seamless Blended Weld! Tour Blast | 1.5° Upright | Standard 3.5° Loft | Face Balanced ••Tour Style Customs•• ForeGolfModsOnly.com ••••••••••••••••••••••••
Face-Balanced TOUR STYLE Putter Conversion
Переглядів 6332 місяці тому
Taking an ordinary retail putter model & turning it into a custom Tour-Style putter built to the players exact specifications. FORE GOLF MODS ONLY
TIG WELDING ALUMINUM in 3hrs - No Prior Experience
Переглядів 3,2 тис.4 місяці тому
Happy National Welding Month! (April) I brought my Brothers-in-law to my Tig Studio to try Welding for their very first time ever! No better place to start than by jumping straight into TIG ALUMINUM! We’ve set a 3 hour limit to see if we can be stacking dimes on their first day of welding. From a crash course in process, material prep, safety, setup, & various techniques, how did these guys han...
Warped Classic Putter - Salvage Rebuild - Part 2
Переглядів 7305 місяців тому
This vintage Newport Two oval track Classic found its way to an inexperienced ‘customizer’ & is likely damaged beyond repair. The extreme welding warped this entire putter, leaving it as a total loss. Furthermore, the flange was gouged out from excessive grinding & needs to be rebuilt. Follow along for more! #foregolfmodsonly kaneindustries.co
Is Saving This Warped Putter Even Possible!?
Переглядів 1,2 тис.5 місяців тому
This vintage Newport Two oval track Classic found its way to an inexperienced ‘customizer’ & is likely damaged beyond repair. The extreme welding warped this entire putter, leaving it as a total loss. Furthermore, the flange was gouged out from excessive grinding & needs to be rebuilt. Follow along for more! #foregolfmodsonly kaneindustries.co
PUTTER MODIFICATIONS - Weld-in Stamping & Sight Dot Delete
Переглядів 2,1 тис.6 місяців тому
Custom ordered modifications on these two putters.
CAFE COWL FENDER LIGHT - All Aluminum Made
Переглядів 1,8 тис.6 місяців тому
Uncle Donny is building a Turbo Café & Wanted something completely custom. This is it.
TIG - AC Balance & FREQUENCY Hz [A’s to Q’s]
Переглядів 2,1 тис.8 місяців тому
TIG - AC Balance & FREQUENCY Hz [A’s to Q’s]
[A’s to Q’s] What welder would I recommend for those looking to go PRO?
Переглядів 8858 місяців тому
There’s many great welders to choose from. Do your research and find what functions meet your needs & what fits your expected budget. For tig welding, I do recommend my OTC/RKX220 tig package that I’ve collaboratively developed with OTC DAIHEN, as an ultimate tig welder for 1-220 amps watercooled.
[A’s to Q’s] Simple advice to begin welding exotic alloy metals?
Переглядів 7858 місяців тому
[A’s to Q’s] Simple advice to begin welding exotic alloy metals?
[A’s to Q’s] what size of tungsten do I use?
Переглядів 1,2 тис.8 місяців тому
[A’s to Q’s] what size of tungsten do I use?
Tungsten Tips for 100% TIG welding Control & Consistency
Переглядів 6 тис.9 місяців тому
Tungsten Tips for 100% TIG welding Control & Consistency
Bringing it Home - WeldLabs • Rush Kane
Переглядів 2,2 тис.Рік тому
Bringing it Home - WeldLabs • Rush Kane
EP:02 • [Arc Junkies] WELDLABS X LINCOLN ELECTRIC
Переглядів 2,3 тис.Рік тому
EP:02 • [Arc Junkies] WELDLABS X LINCOLN ELECTRIC
WELDER REVIEW - CK WORLDWIDE MT200-AC/DC
Переглядів 7 тис.2 роки тому
WELDER REVIEW - CK WORLDWIDE MT200-AC/DC
[making] ENGAGEMENT RING • Hand Formed + Tig Welded
Переглядів 8 тис.3 роки тому
[making] ENGAGEMENT RING • Hand Formed Tig Welded
[arc defence] UV BLOCKING SLEEVES • 1st DROP 12:26:2020 (description below)
Переглядів 4,7 тис.3 роки тому
[arc defence] UV BLOCKING SLEEVES • 1st DROP 12:26:2020 (description below)
THIN ALUMINUM TIG TIPS • CLEAN + PREP + RAW CLIPS
Переглядів 27 тис.3 роки тому
THIN ALUMINUM TIG TIPS • CLEAN PREP RAW CLIPS
WELDING for OFF-ROAD • what it’s like welding for motorsports
Переглядів 18 тис.3 роки тому
WELDING for OFF-ROAD • what it’s like welding for motorsports
STEEL BUMPER FAB: Welding & Grinding a Steel Plate Bumper
Переглядів 56 тис.3 роки тому
STEEL BUMPER FAB: Welding & Grinding a Steel Plate Bumper
TUNGSTEN LIKE NEW : improved tig consistency with electrode prep
Переглядів 17 тис.3 роки тому
TUNGSTEN LIKE NEW : improved tig consistency with electrode prep
TIG THIN - heavy hertz (16ga Aluminum Welding)
Переглядів 34 тис.3 роки тому
TIG THIN - heavy hertz (16ga Aluminum Welding)
TIG INTAKE PIE-P / cut and tig welded aluminum air intake
Переглядів 6 тис.3 роки тому
TIG INTAKE PIE-P / cut and tig welded aluminum air intake
CURB-GRND WHEEL: tungsten active gas weld repair
Переглядів 12 тис.3 роки тому
CURB-GRND WHEEL: tungsten active gas weld repair
Beautiful...how many amps?
❤
Sir, we can make this welding Gloves, do you needed any glove?
All mig welders want to be tiggy boys so bad
.
Could y'all do a front sight delete on an Odyssey Jailbird?
I’m not currently offering work with coated putters, but I can remove milled dots and have the metal finished ready for recoating elsewhere.
@@KANEKIDWELDS Okay cool, so would I need to get the paint stripped before I sent it to y'all? Or do y'all have that capability? Sorry for all the questions.
No problem with prep👊🏼 I can strip the coating for the weld work. I appreciate the questions and interest I’m my craft! Thank you!
Where do you get the necks for the putters? Are you ordering them?
Thanks for the cool video. Didnt even know you did custom putters. Keep up the killer work.
Thanks! I love this work!
👍
Sent this video to my Dad and cousin. My Dad is 89 and had a 79 (yes, for 18) last week. Was talking about how you re-configure and re-purpose Scotty Cameron's so he was interested.
Thanks so much for sharing! I love this work!
Awsome to find someone that grinds their tungsten, the same as I always have.
Aswel as your finish work is real similar
The 2” Pferd diamond Disc on the Milwaukee 90° is 😮💨🔥
Very nice work.
Thanks!!
👍
Looks like it was molded just like that !
Thanks!!!
👍
Needless to say, welding razor blades... Needless to say. Now, I have a new goal - thanks for brutalizing my ego. Great video!
do you put something on it to protect the color? from wearing off
Only raw stainless oxide. Applying anything into it will darken the vibrancy & I don’t want that. I’m easy on my tools & if it ever wears away, I know the guy to restore it😉
@@KANEKIDWELDS oh yeah, got it thanks 👍👍👍
Fantastic video. I would recommend one small change. In your post production, if you lower the volume during the high frequency shots, would really help out the ears, I found myself constantly raising and lowering the volume.
What is the polishing compound
I chuck the tungsten up in a drill, then hit it with a scotchbrite pad to remove discoloring or the colored band on the end. Then I like to take it straight to the belt sander and blast full speed on the drill, slow to half trigger at the end, and remove the tungsten from the belt with the drill still spinning. Dial your taper for whatever situation to your preference.
I wonder if well-placed taps with a carbide-tipped ballpeen hammer on the concave side would straighten it out? Knifemakers use this technique post heat treat to straighten out any wooptys.
What brand is that belt sander?
I don't know if you two are aware of it, but you're learning from one of the best in the industry here with your brother in law . Happy TIG'ing brothers . :)
You started to talk about a question I have, When the aluminum coats the last half inch of the tungsten , especially when the filler hits the tungsten, do you try to grind that off, or just break off that half inch ?????? May sound trivial, but as much as I do it, tungsten does not last long.....lol Thank you so much for video!!!!
instagram.com/reel/CzmxF67vhfs/?igsh=aDQ3Yzg3cGZiODN4
Ty!!!! @@KANEKIDWELDS
Such a great experience and opportunity!
You CRUSHED it! I still can’t believe you managed to feed filler like that your first time welding! 🤘🏼
Looking forward to the online training videos subscription!
Wow, how lucky to get this training. Great job!
Yeah, a lot of techniques and years of tricks in one day . :)
Nice work! How do you color the stamps?
Thanks! Stamping and Fills are done by Weston Maughan
I modified a common woodworking router bit with a much wider roller bearing to trim surfaces exactly like the shelf on this project. A bottom bearing flush trim bit. Made a delrin sleeve the same od as the bottom bearing bit 1/2” bit, machined to take the bearing from the same bit in 1/4” diameter. For me, it works really well. Just keep an eye on the end of the delrin as you travel and don’t lever it up off the guide surface. Hardly have to file, with just a little practice..
A lot of heat in the welds how does it not warp???
Makes total sense . :)
Nice Rush . :)
I love that you like golf. 😂 seriously respect the grind.
Very nice work. Everything about making your own Anser style putter out of blocks of 303 ss or ? I work for Choice Metals in New Hampshire if you’re ever looking for anything exotic. Maybe we can make a trade off !?!?!
Thanks!!!! I will definitely keep you in mind! I’m on the welding/fab side of metal working & haven’t been much of a machinist (simple lathe). It’s good to know where materials can be supplied & you carry exotics🔥
😮🙌🏼
Dude… I hope the right people see this. Your knowledge and work is second to no one. 🎉 Bravo ! And thank you, this has encouraged and taught me too do some of my own old putters.
How much did this cost? Need this done to my putter.
Didn't know there was a market for welding golf clubs. My type of fixes
A quick search showed similar, possibly less vintage or valuable, putters going for close to a thousand. Certainly worth a few minutes of welding and sanding to bring back to life.
When cleaning to degrease or get whatever out of the metal, would using a ultrasonic cleaner with acetone do a good job (after hand cleaning)? Just wondering.
That works well for surface cleaning, likely nothing better! These have the oil/contamination embedded and locked inside of the grain structure from the quench-hardening process. Best I know for this is to warm the grain until it releases oils, then follow with the ultrasonic. Acetone lifts oils away & soapy hot water removes what the acetone won’t dilute. I also like to isopropyl rinse parts after water wash for the best clean I can get.
Wouldn’t it be easier to place it into a furnace and get it to a bright orange and then press it flat?
Just as likely to warp again as it cools down. If you fixture it in place, it'll probably just spring back as soon as it's unclamped. That said, I'm curious if there are any special properties lost by heating it, either by welding or annealing in a furnace.
@@dwaynesykes694 I’m talking about orange hot and the press will cool it down so it’ll be flat in the press.
@@RadDadisRad ask any knifemaker how well flattening an orange hot piece of metal in a press goes. The rapid cooling from the press, which acts like a giant heatsink, actually creates rather tremendous stresses. It'll spring back into a banana shape the second you take it out of the press. Flattening/straightening is done pretty much the same way as here, with targeted application of heat and a solid understanding of how the metal will move as a result of that application of heat. Alternatively, if you have enough material present, you can anneal/stress relieve the piece in a heat treat oven with slow, controlled cooling, it'll move how it wants based on existing internal stress that's relieve during heat treat, then machine it into the desired finished shape. It'll move again a bit if subsequently heat treated, but it should be minimal given a well-controlled process. Final dimensions can be achieved by grinding after heat treat.
@@dwaynesykes694 works well, most of them do it.
Thanks for your input with this response! Great further explanation of how technical this is and the process to control it!
Hey, for those of us who are clueless about golf, what is the purpose of this modification?
This is custom made for personal style & the specific modifications are for user playability. How it’s been styled, is so it looks like this. How is built, is to match specific body mechanics to better control the flow of the putter throughout the arc of the swing. This is set with a long neck, that balances the face of the putter and redirects the arced swing path to be more linear (straight back and straight forward with less arc). Also, with the extended neck, it allows for a closer foot to ball position, that lets the eyes look down more directly over the ball to see the rolling line of the intended putt. This is also built with more loft than standard, to accommodate for forward shaft lean, producing a true dynamic angle of attack on the ball.
@@KANEKIDWELDS Wow. It's mind boggling to have a glimpse of how much thoughts and considerations go into such a thing. The question is then why don't they do it this way to being with? I think I remember seeing you on Instagram cutting the original putter and adding this 2-3 inches long extension. So why not manufacture it this way to being with? Or are you "tailoring" it to the physical build of a one specific player?
@@danl.4743 cutting this from a much larger block of metal would be the step for a one piece milled construction. This style doesn’t match the movements of the majority of players, so it would be a very expensive and smaller market to manufacture for. It definitely is done in one piece for elite players that have proven engineering specs for their setup, or private customers paying for it. A lot of pro golfers putters are cut and rebuilt to their specs just like this one is, & sometimes look like a monster that works out perfectly for them. Kinda like shoes, it’s best when you find comfort and a great fit, all with a style that gives a boost of self-confidence.
@@KANEKIDWELDS Got it. Thanks!
you make a good grinder.
yours still had heat mark on both sides mate get off the pipe.
This is exactly what happens with welding. The surface heat tint will be removed when this gets blasted and refinished. This is metalwork & how things are made.
Does it have a deep circumference cuz I have a lot of hair I hate hats that don’t sit all the way down if you know what I mean?lol
Exactly what I'm doing and he isn't wrong on getting consistent welds and being paid to practice. Only difference is, he's making a ton more money and I moved to fab lead
Oh snap that's nice
Those are very expensive Scotty Cameron putters 😂
I love it Kid! Good to see you brother, looks great! Still so much value in every lesson
Red then blue roloc to finish. Then scotch bright to regrain if it had any grain.
Turned out great, always wondered how well the 2" polishing discs work. Might have to pick a pack up!